Archive for the ‘tattoo gun’ Category

How to tattoo-professional guide (1)

July 13, 2010


Tattoos have become more and more popular in recent years. People always prefer diversified tattoo designs and styles to show off their personality while some would never think of tattooing pictures or symbols onto their bodies as permanent makeup — a type of tattoo — to emphasize their eyes and lips.

Therefore,we offer some useful info about how to tattoo for some newbeing here or some who are still hold suspicious attitude to tattooing—this fashion industry.

What is tattoo

Tattoos are made by injecting tattoo ink into a person’s skin. To do this, tattoo artists often use an electrically-powered tattoo machine. The machine moves a solid needle up and down to puncture the skin layers between 50 and 3,000 times per minute for line of tattoo image. While puncturing the skin, tattoo ink in the needles will be injected into the outer layer of skin and new tattoos come into being.

Tools needed

Professional and good quality tattoo kit

Details about specifications and components, refer to MYDEPOTS-your professional tattoo kit guide.

tattoo kit

tattoo kit

Next, we’ll look at how tattoo artists actually create tattoos, from preparation to finishing touches.

Before tattooing: Sterilize tattoo equipment & Prep Work

A tattoo machine creates a puncture wound every time it injects a drop of ink into the skin layer. Since any puncture wound has the potential for infection and disease transmission, most of the application process focuses on safety. Tattoo artists use sterilization, disposable materials and hand sanitation to protect themselves and their clients.

To eliminate the possibility of infection, most tattoo components, including inks, ink cups, gloves and needles, are single use. Many single-use items arrive in sterile packaging, which the artist opens in front of the customer just before beginning work.

Reusable components like needle bar and tubes, are sterilized before every use. The only acceptable sterilization method is an autoclave — a heat/steam/pressure unit often used in hospitals. Most units run a 55-minute cycle from a cold start, and they kill every organism on the equipment. To do this, an autoclave uses time, temperature and pressure in one of two combinations:

A temperature of 250° F (121° C) under 10 pounds of pressure for 30 minutes

A temperature of 270° F (132° C) under 15 pounds of pressure for 15 minutes

Prior to sterilizing the equipment, the artist cleans each item and places it in a special pouch. An indicator strip on the pouch changes color when the items inside are sterile.

tattoo sterlization equipment tattoo sterlization equipment

Now, let’s look at how the artist creates the tattoo.

Tattooing Process: Outline, Shading and Color

Tattoo machine can be classified into line and shade gun for outline and shading/color respectively. Anyhow, most skilled tattoo artists choose some best-performed 12-wrap coil tattoo machine for both line and shading.

Clients work with artists to create custom tattoo designs, or chose images from flash, which are tattoo designs displayed in the shop. The artist draws or stencils the design onto the person’s skin, since the skin can stretch while the artist uses the tattoo machine. The artist must also know how deeply the needles need to pierce the skin throughout the process. Punctures that are too deep cause excessive pain and bleeding, and ones that are too shallow will make uneven lines.

The tattoo artist fills in a tattoo using a thicker needle. See the needle in action.The tattoo itself involves several steps:

Outlining: Using a single-tipped needle and a thin ink, the artist creates a permanent line over the stencil. Most start at the bottom of the right side and work up (lefties generally start on the left side) so they don’t smear the stencil when cleaning excess ink from the permanent line.

tattoo outline

tattoo outline

Shading: After cleaning the area with soap and water, the artist uses a thicker ink and a variety of needles to create an even, solid line. Improper technique during this step can cause shadowed lines, excessive pain and delayed healing.

tattoo shadingtattoo shading

Final cleaning and bandaging: After using a disposable towel to remove any blood and plasma, the artist covers the tattoo with a sterile bandage. Some bleeding always occurs during tattooing, but most stops within a few minutes.

After finishing tattoo cleaning and bandaging, never think you can be at ease from then on. You need to mind tattoo aftercare so much otherwise you may ruin a wonderful tattoo.


How to tattoo-professional guide (2)

July 13, 2010

Aftercare for Your New Tattoo:

Now,after you have your fresh new tattoo, don’t think your work has been done.You also need to take good care of it! From this point, your artist is not responsible for any infection or problems you may have with your tattoo if you don’t take proper care of it. It is very important that you follow these guidelines.

Leave That Bandage Alone!

Your artist took the care to cover up your new tattoo for a very good reason – to keep air-born bacteria from invading your wound. Yes, as pretty as your new tattoo is, it is still a wound. Leave the bandage on for a minimum of two hours. Excitement of having a new tattoo will make you want to remove the bandage so you can show your friends, but your friends will just have to wait until later.

Wash and Treat

After removing the bandage, use lukewarm water and mild, liquid antibacterial or antimicrobial soap to gently wash away any ointment, blood and/or plasma and to completely clean the area. Do not use a washcloth or anything abrasive. Your hand is your best tool in this case. (If your tattoo feels slimy and slippery, you have probably been oozing plasma. Try to gently remove as much of this as possible – when the plasma dries on the skin surface, it creates scabs.)

Then pat (do not rub) the area firmly with a CLEAN towel or paper towel to get it completely dry. Follow with a very light application of your choice of ointment. A&D vitamin enriched ointment would be my first choice, but if you don’t have any, Bacitracin or a similar antibacterial ointment is acceptable.

Do not use Neosporin. This is a wonderful product for cuts and scrapes, but not for tattoos. Some can have an allergic reaction to the Neosporin, which causes little red bumps. When the bumps go away, so does the ink, and you end up with a polka-dotted tattoo.**

Bathing, Showering, Hot Tubs, and Swimming

Yes, you can (and should!) shower with a new tattoo. It’s OK to get your tattoo wet – just don’t soak it. Submerging your tattoo in a bath or hot tub can cause serious damage, so you’ll want to avoid those for 2-3 weeks, but showering is perfectly fine as long as you don’t saturate your tattoo. If you get soap or shampoo on your tattoo, just remove it quickly with water. Swimming – whether it be a pool, fresh water or salt water – should be avoided for at least 2 weeks.

Scabbing and Peeling

After a few days, you will notice some peeling and possibly a little scabbing. Excessive scabbing could indicate a poorly-done tattoo, but a little is sometimes normal and there is no need to panic. Apply warm moist compresses to the scabs for about 5 minutes 2-3 times a day to soften them and they will eventually come off on their own. (Do not apply ointment or lotion to a softened scab – wait for it to dry) You will also start to itch, just like a sunburn when it begins to heal. The advice here is, don’t pick, and don’t scratch! If the skin itches, slap it. If it is peeling, put lotion on it. And if it is scabbing, just leave it alone. Your tattoo is almost healed, and now is not the time to ruin it!

Protection from the sun

After your tattoo is healed, from now on, you will always want to protect it from the sun’s ultraviolet rays. These can fade and damage a brilliant tattoo very fast.

Tattoo Removal Options and Alternatives ( your last choice)

If you already have a tattoo, you’d better not remove it cos the cost you need to pay for it is unaffordable somehow and of course you will suffer so much pain.

If you really wish to partially or completely remove your tattoo, you should first consider your options and decide which method might be best for you.

Laser Removal

Today, lasers are the most common method of tattoo removal. They work by targeting the ink with pulses of highly concentrated light that break the ink into tiny fragments, which are then cleared away your own immune system. However, this isn’t all done with just one treatment. The more treatments you have, the more the laser can penetrate to destroy the ink. But, the more treatments you have, the more damage you do to your skin, causing painful blisters and scabs that can eventually lead to scarring. Experts in removal therapy say that technology has advanced to the point where scarring is minimal, sometimes non-existant, but this can vary depending on the situation.

Laser removal can be painful to your wallet as well. Depending on your tattoo, you may need 1-10 sessions, each costing in the range of $250-$850 per session. A large, professional tattoo in color could cost thousands of dollars to remove, and the effectiveness of the removal still isn’t guaranteed.

tattoo removal laser removal

tattoo removal laser removal

Intense Pulsed Light Therapy

Intense Pulsed Light Therapy, or IPL, is a dermal enhancer currently being used in some spas. Instead of laser light, it uses high intensity light in pretty much the same manner. A gel is applied to the skin and then a wand is used to emit pulses of light onto the skin area being treated. This method is said to be less painful than laser therapy, and more effective, resulting in less total treatment sessions. The bad news is that it also carries a heftier price tag – one clinic offering a price of $10 per pulse. Depending on how many pulses per session your tattoo requires, this could add up to a significant amount of money.


Medical Methods

There are some other medical methods of tattoo removal so painful and ineffective that laser removal replaced them as soon as it became available. These include dermabrasion, which would actually “sand” away the top layer of skin through abrasive friction. Another method is excision, where the tattoo would be cut away and the skin sewn back together. These methods have been proved to cause much damage to the skin and result in severe scarring, and are only used today in extreme cases where laser surgery is not an option.

Cover-up – An Alternative to Removal

tattoos cover up

tattoos cover up

If you have a tattoo you just don’t like, there is an alternative to having it removed – and it’s much less painful and a lot less expensive. It’s called a cover-up, and that’s exactly what it is. A cover-up is simply having an old tattoo covered up with a new tattoo. Many tattoo artists are becoming quite skilled in doing cover-up jobs, and can help you come up with a design that you will be much happier to live with. The price is usually just the price of a regular tattoo, and when done correctly your old tattoo will be completely invisible, reduced to a memory.

Once a tattoo has been covered up, it’s very difficult – if not nearly impossible – to cover it up again if it’s not done right.

We can see the above methos for tattoo removal are more or less dangerous and time and money wasted. Therefore, it is not a good ides to have tattoo removed from ur body. Once you had tattoo, you need to take care of it or think over and over before you have your favorate tattoo designs .

More professional guide and tattoo info , go to MYDEPOTS.COM

how to set up liner & shader tattoo gun ?

March 30, 2010

When tattooing , tattoo artists need to adjust power supply and tattoo needles for liner & shader .  So how to set liner & shader tattoo guns ?

Firstly , you need to know the work principles of tattoo guns.

basic tattoo gun work principle

Firstly, you should assemble the tattoo gun as the table shows above before connecting the tattoo power supply.

The Tattoo Gun  is constructed with two coils. Above the coils is an armature bar that is drawn to the coils when electricity passes through them. The needle is attached to the armature bar and that’s what causes the needle to go up and down.

 Attached to the armature is a front and rear spring. These springs can be varied in thickness to each Tattooist’s preferences.

 The rear spring attaches the armature to the frame of the machine and the front spring rests on the contact screw. This contact screw is what you will be adjusting to determine whether the machine is set up to be a shader or a liner.

 To set up the liner tattoo machine, you need to hold the armature down against the coils. The space between the contact screw and the armature is the length of the stroke. The longer the stroke is, the longer it takes for the tattoo machine to complete the stroke. When you are doing the lines on a tattoo, you want the machine to deliver short, quick strokes so that it will deliver a lot of ink in the shortest amount of time. This will make an unbroken line that stands out.

Here are some liner tattoo guns for reference :

VVME quality 8-wrap coils tattoo gun


 To make the tattoo machine do this, you will need to adjust the contact screw. It can be adjusted by turning the screw with your hand. You don’t need any tools to do this. Screw down the contact screw until the stroke is approximately as long as a dime is wide. This will be a good starting point. With practice you will find where you like it set at.  

To set up the shader tattoo machine, you need to imagine what the shading will look like. The shading should have a misty look to it. To achieve this, you will want the stroke to be longer and slower than what you set up on the liner. Screw the contact screw so that the stroke is about as long as a nickel is wide. This is a good place to start. You may want it wider or narrower.

Here is some shader tattoo gun for reference:

VVME Pro 10- wrap coils tatoo gun

 As you practice and get better at tattooing, you will find what works best for you.

There is once an investigation showing that the Optimum Voltage is 6-8v For Shader & 8-10v For Liner . Anyhow , every experienced tattoo artists  have their own standard about Optimum Voltage for liner and shader..

Pictures and materials resourse :

Discounted Pro tattoo gun series (2)

March 30, 2010

In the last blog article , we mentioned about the tattoo guns of 10-wrap coils . Here we talk about the other 10-wrap coils tattoo gun  ,,  New 10-wrap Coil Tattoo Gun For Liner & Shader, Premier

New 10-wrap Coil Tattoo Gun For Liner & Shader, Premier from VVME


This is superior quality, heavy-duty tattoo gun with 10-wrap coils and 3/8″ core in Manganese steel alloy. Unbeatable price with cool design and upgrade technology level.

Sale price :  $35.99


  • New style of clad steel assembly.
  • Easy and comfortable to use for both liner & shader.
  • Balanced, high-strength, low-vibration frame.
  • Tight-tolerance, low-resistance upgraded hardware.
  • Heavy-duty, carbon-steel hex screws with composite insulators.
  • Precision-wound coils with heat-resistant, resin coil-washers.
  • Smooth & powerful operation.


Brand Mydepots
Frame Material Hand Ground Cast-Iron Frame
Construction Handmade
Color Chrome
Recommended Use Both Liner & Shader
Coils Dual (2) 10-Wrap Coils
Coil Core 3/8″
Impedance 4Ω (Nominal)
Capacitor 47uf / 100v
Spring Thickness 0.50mm Rear Spring & 0.50mm Front Spring
A-Bar Material Low-Carbon Steel
Working Voltage 2 – 15v
Optimum Voltage 6-8v For Shader & 8-10v For Liner
Frequency 25000 rs/m – 30000 rs/m


Pictures and material resourse :

Discounted Pro tattoo gun series (1)

March 29, 2010

In my last blog , we learn so much about the tattoo gun : the classifications , the work principles and so on.

In fact , tattoo guns with different wrap coils and materials can take different effect when tattooing.

So how to choose the right tattoo guns , firstly you need to know the specifications of the tattoo guns.

Below are 6 series tattoo guns with details about their futures and specifications and referred wholesale prices:

New 10-wrap Coil Tattoo Gun For Liner & Shader, Heavy-duty, Premier


New 10-wrap Coil Tattoo Gun For Liner & Shader, Heavy-duty, Premier VVME

This is superior quality, heavy duty tattoo gun with 10-wrap coils and 3/8″ core in Manganese steel alloy. Unbeatable price with cool design and upgrade technology level.


  • Excellent steel framework in bronze antique finish.
  • Easy and comfortable to use for both liner & shader.
  • Balanced, high-strength, low-vibration frame.
  • Tight-tolerance, low-resistance upgraded hardware.
  • Heavy-duty, carbon-steel hex screws with composite insulators.
  • Precision-wound coils with heat-resistant, resin coil-washers.
  • Low noise, stable performance.


Brand Mydepots
Frame Material Hand Ground Cast-Iron Frame
Construction Handmade
Color Bronze
Recommended Use Both Liner & Shader
Coils Dual (2) 10-Wrap Coils
Coil Core 3/8″
Impedance 4Ω (Nominal)
Capacitor 47uf / 100v
Spring Thickness 0.50mm Rear Spring & 0.50mm Front Spring
A-Bar Material Low-Carbon Steel
Working Voltage 2 – 15v
Optimum Voltage 6-8v For Shader & 8-10v For Liner
Frequency 25000 rs/m – 30000 rs/m

 In next blog article , i will introduce other series and how to choose the right tattoo guns for liner or shader. The key lies in the tattoo guns’ coils and the materials . So that is why i often focus on the ” heavy duty”  “low-vibration” and  ” stable performance”..

Pictures and material resourse :

what is tattoo machine(gun)?

March 25, 2010

A tattoo machine (tattoo gun)  is a hand-held device generally used to create a tattoo, a permanent marking of the skin with various quality tattoo inks. Modern tattoo machines use alternating electromagnetic coils , compared with the old rotary technology , to move a needle bar up and down, infecting pigments into the skin. Tattoo artists generally use the term “machine”, “gun”, or even “iron”, to refer to their equipment.

The Classifications of  Tattoo Gun

Functionally speaking there are liner tattoo machine and shader tattoo machine.

Mechanically speaking, there are coil tattoo machine and rotary tattoo machine.

Rotary tattoo machine: the older type, based on rotary technology, which was invented by Samuel O’Reilly and was improved by the fellow tattoo artists through the years. The rotary tattoo machines are no longer the mainstays.

Coil tattoo machine: the modern type, based on electromagnetic technology, which is a significantly more effective form of tattooing than the rotary tattoo machine.

The 8 wrap coil is used mostly when doing an outline with a 1, 3, 4, and a 5 needle outliner.

Take this advanced VVME 8-wrap coil tattoo gun for example

Pro-made 8-wrap coil tattoo gun from VVME

Features  & Benefits:

• New style of stainless steel assembly with light weight

• Easy and comfortable to use for both liner & shader

• Balanced, high-strength, low-vibration frame

• Tight-tolerance, low-resistance upgraded hardware

• Carbon-steel hex screws with composite insulators

• Precision-wound coils with heat-resistant, resin coil-washers

• Low noise, stable performance.

When you are going to use a 8 or 14 needle outliner, a 10 wrap coil tattoo machine is recommended for better use.

Take this VVME   Unique 10-wrap Coil Tattoo Gun For Liner & Shader , Pro  

Unique 10- wrap coils tattoo gun from VVME

If you are going to use a 4 , 5 , or six needle shader then a 10 wrap coil tattoo machine is just fine, but if you are going to use a 11 through 17 needle magnum tattoo needle then a 12 wrap coil tattoo machine is suggested .

Liner tattoo machine: the purpose of a liner machine is to draw the outlines of the tattoo; normally ,the 8 wrap coils in the motor is normally used.

Shader tattoo machine: the shader machine is to fill out the tattoo with different colors, compared with the liner machine, shader requires a stronger power supply, and it has normally 10 wrap coils in the motor.

   Pictures and Materials Resourses :